ESA: Rosetta: Comet 67P/Churyumov–Gerasimenko

Find out the latest thinking about our universe.
User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Philae status update November 15

Post by MargaritaMc » Sat Nov 15, 2014 9:58 am

Updates from the Rosetta blog 15 November 2014
In brief: Philae was able to complete and transmit all the prioritised science tasks that it had been set to do. :D
PHILAE STILL TALKING!
While the search for the final landing site is still on-going, the lander is racing against the clock to meet as many of the core science goals as possible before the primary battery is exhausted. Under the low illumination conditions at Philae’s location, it is unlikely that the secondary batteries will charge up enough to enable extended surface operations.

All of the science instruments were deployed, including the instruments that required mechanical movement, such as APXS, MUPUS, and the drill, SD2, which is designed to deliver samples to the PTOLEMY and COSAC instruments inside the lander. ...
Philae's planned mission is expected to come to an end when batteries are exhausted sometime on Saturday; future contacts are possible if the illumination conditions change as the comet orbits closer to the Sun, enabling solar power to flow again.

The Rosetta orbiter mission continues as planned, with an immense amount of science observations still to come.
FIRST HOUR OF LANDER COMMUNICATION

Update from Stephan Ulamec, Lander manager at DLR:

“We’ve got data – all the house-keeping data and data from COSAC – although we’ve no idea what’s in there yet. The drill (SD2) moved up and down, but again, we don’t yet know what we have.”

“We did the lift and turn; the landing gear lifted by about 4 cm, and we turned about 35 degrees.

“The carousel of Ptolemy was also turned and we are running Ptolemy for a concentrated 'sniff'.

Instrument reminder:

COSAC: The COmetary SAmpling and Composition experiment (detecting and identifying complex organic molecules)

PTOLEMY: an evolved gas analyser, which obtains accurate measurements of isotopic ratios of light elements, such as hydrogen, carbon, nitrogen and oxygen.

SD2: Sampling, drilling and distribution subsystem (drilling up to about 23 cm depth and delivering material to onboard instruments for analysis)
OUR LANDER’S ASLEEP
With its batteries depleted and not enough sunlight available to recharge, Philae has fallen into 'idle mode' for a potentially long silence. In this mode, all instruments and most systems on board are shut down.

"Prior to falling silent, the lander was able to transmit all science data gathered during the First Science Sequence," says DLR's Stephan Ulamec, Lander Manager, who was in the Main Control Room at ESOC tonight.

"This machine performed magnificently under tough conditions, and we can be fully proud of the incredible scientific success Philae has delivered."
...
From now on, no contact would be possible unless sufficient sunlight falls on the solar panels to generate enough power to wake it up.

The possibility that this may happen was boosted this evening when mission controllers sent commands to rotate the lander's main body, to which the solar panels are fixed. This may have exposed more panel area to sunlight.
... However, given the low recharge current available from the solar cells, it is considered unlikely that contact with Philae will be established in the coming days.

The hugely successful Rosetta mission will continue, as the spacecraft tracks comet 67P/C-G on its journey to the Sun.
ESA news release: Pioneering Philae completes main mission before hibernation
Rosetta’s lander has completed its primary science mission after nearly 57 hours on Comet 67P/Churyumov–Gerasimenko.

After being out of communication visibility with the lander since 09:58 GMT / 10:58 CET on Friday, Rosetta regained contact with Philae at 22:19 GMT /23:19 CET last night. The signal was initially intermittent, but quickly stabilised and remained very good until 00:36 GMT / 01:36 CET this morning.

In that time, the lander returned all of its housekeeping data, as well as science data from the targeted instruments, including ROLIS, COSAC, Ptolemy, SD2 and CONSERT. This completed the measurements planned for the final block of experiments on the surface.

In addition, the lander’s body was lifted by about 4 cm and rotated about 35° in an attempt to receive more solar energy. But as the last science data fed back to Earth, Philae’s power rapidly depleted.

... Meanwhile, the Rosetta orbiter has been moving back into a 30 km orbit around the comet.

It will return to a 20 km orbit on 6 December and continue its mission to study the body in great detail as the comet becomes more active, en route to its closest encounter with the Sun on 13 August next year.

Over the coming months, Rosetta will start to fly in more distant ‘unbound’ orbits, while performing a series of daring flybys past the comet, some within just 8 km of its centre.
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Info sources

Post by MargaritaMc » Sat Nov 15, 2014 10:31 am

BTW, the discussion on the Rosetta blog comments area is often interesting and informative to read.

Later edit. If there are any other Rosetta/Philae aficionados here 8-) , this is the Reddit Rosetta and Philae live commentary

There is a are two very good blog posts here at Emily Lakdawalla's Planetary Society Blog.

The first is:
Philae status, a day later
in which she gives this animated gif of Philae falling, taken by Osiris

Image
ESA/Rosetta/MPS for OSIRIS Team MPS/UPD/LAM/IAA/SSO/INTA/UPM/DASP/IDA

Philae falling

This animation shows the Philae lander falling away from Rosetta from 10:24 to 14:24 on November 12, 2014, in images taken an hour apart, beginning about two hours after the spacecraft separated at 08:35


and writes:
I now appreciate why there was so much confusion yesterday. When Philae initially touched down, that triggered the end of its descent sequence and the start of its first block of science activity. Its instruments dutifully performed their measurements and Philae relayed these back to the orbiter -- all while Philae was steadily climbing away from the comet at a speed of 38 centimeters per second. At the same time, the internal flywheel was slowly being braked, and that caused Philae to rotate, which was incredibly confusing to a team that thought the spacecraft was stationary on the comet surface.
The second is:
Philae update: My last day in Darmstadt, possibly Philae's last day of operations
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Sat Nov 15, 2014 10:58 pm

Update on the MUPUS on Philae results from Reddit: Rosetta and Philae live commentary
MUPUS on Philae Experiment Summary
Penetrator deployed properly, temperature drop within the PEN may indicate they hit something on deployment
Other devices saw improved performance after deployment, possibly changed Philae's attitude
Hammering proceeded to cycle through 4 increasingly stronger power settings, with no indication of penetration. The surface seems to be >2MPa hard. They speculate the surface to be composed of a hard ground covered by a fluffy surface (possibly tiny mineral grains or organics)
Data obtained, just nothing from beneath the surface.
Details from the MOPUS twitter account:
Continuing MUPUS on Philae Results
@Philae_MUPUS
Results (10) The depth sensor shows some up and down but no progress. The control loop increased to power setting 2
Results (11) depth sensor still shows no progress. Control loop goes to power setting 3. Still no progress!

Results (12) This means that the stuff is really hard! A very interesting finding, not visible from orbit!

Results (13) We have a secret power setting 4. Nicknamed "desperate mode". Beyond the design specs. We activated it
Results (14) Still no progress. The hammer gave up and failed after 7 minutes. Jerzy was right. We were desperate, activated, were punished

Results (15) Surface must be >2 MPa* hard! The comet remains surprising bizarre and uncooperative
Results (16). To put this into perspective: MUPUS performed beautifully inside the specifications. The comet failed to cooperate
Results (17) The loss of subsurface data is sad. The detection of this very hard crust is a great find the orbiter couldn't have done
Fascinating discovery that the surface is hard, when everything looked like it was loose and dusty. This comet keeps on producing surprises.

*2 Megapascals ≈290 psi. Does anyone know what that might be compared to? I googled, but the only thing I could find was that the manufacture of chipboard/particle board includes being subjected to pressures of between 2 and 3 MPa.

M
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
Nitpicker
Inverse Square
Posts: 2692
Joined: Fri Sep 20, 2013 2:39 am
Location: S27 E153

Re: ESA: Rosetta: 100 days to wake-up

Post by Nitpicker » Sun Nov 16, 2014 1:00 am

Expressing material hardness (as opposed to strength) in MPa doesn't always have a clear meaning unless the details of the particular test are known. If the test was like a Knoop hardness test, 2 MPa would mean a score of ~200, which is around about 3 on the more common Moh's scale of hardness, from 1 (talc) to 10 (diamond), which isn't very hard compared with most engineering materials. Ice has a highly variable hardness and very cold ice is probably harder, but one often sees common ice quoted at ~1.5 on Moh's scale.

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Sun Nov 16, 2014 9:17 am

Thank you, Nit. So are you saying that this possibly equates to the (variable) hardness of ice?
This is a totally new area for me, so forgive me if I'm asking a daft question.

Change of subject: Emily Lakdawalla has written a very nice wrapping-up blog post here:
http://www.planetary.org/blogs/emily-la ... sleep.html
I've not excerpted from it as I think it's best read in full.

M
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Rosetta's co-pilot...

Post by MargaritaMc » Sun Nov 16, 2014 9:52 am

Whilst watching the live broadcast of the Philae operations, I was curious to know who this female engineer is:
I learnt from Emily Lakdawalla's blog post (above) that she is Elsa Montagnon, the deputy flight director on the Rosetta mission. She is also working on ESA’s Mercury mission BepiColombo
Here is some info about her and her job:
Click to play embedded YouTube video.
Edited to change the photograph
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
Nitpicker
Inverse Square
Posts: 2692
Joined: Fri Sep 20, 2013 2:39 am
Location: S27 E153

Re: ESA: Rosetta: 100 days to wake-up

Post by Nitpicker » Mon Nov 17, 2014 12:31 am

MargaritaMc wrote:Thank you, Nit. So are you saying that this possibly equates to the (variable) hardness of ice?
This is a totally new area for me, so forgive me if I'm asking a daft question.
Not a daft question, but I'm not really sure what the "> 2 MPa" hardness measurement shows. I haven't read up on the instrument that made the measurement. I was just trying to provide a comparison based on what I know about material hardness.

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Mon Nov 17, 2014 10:16 am

Here are two demonstrations of MOPUS. The one with a commentary is in Polish, which I don't understand. But the demo is reasonably self explanatory.
Click to play embedded YouTube video.
This one was a link from the Planetary Society.
Click to play embedded YouTube video.
Rosetta Lander Philae - Mupus & Sesame First Science Sequence

Published on 12 Sep 2013
Two of Philae's scientific experiments are operated at the same time. After a simulated deployment from the Lander MUPUS Penetrator is operated in 'Hammering Mode' and SESAME CASSE is recording the strokes.
The Polish one makes it more clear that an attempt is being made to hammer in a "nail". From the other video, which I saw first, I thought that it was a case of a hammer itself hitting the surface.

Does that make the hardness of >2 MPa any clearer?

Thanks for your help! Much appreciated.

M
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
Nitpicker
Inverse Square
Posts: 2692
Joined: Fri Sep 20, 2013 2:39 am
Location: S27 E153

Re: ESA: Rosetta: 100 days to wake-up

Post by Nitpicker » Mon Nov 17, 2014 11:55 am

I've just read as much about the MUPUS hammer and penetrator as I can find (not much), and I am no closer to figuring out what "> 2 MPa hard" means, or how to compare it to any known materials. The instrument is unlike any standard hardness, strength, or toughness test I know of in the field of mechanical engineering. In truth, whatever they were trying to measure in MPa (i.e. pressure, or force/area) was beyond the capability of the instrument anyway. But the test seems more like a standard penetration test used in geotechnical engineering, which typically tests soil density via one kind of empirical formula or another. Yet this test isn't normally measured in MPa, as far as I know. So, it remains a mystery to me.

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Mon Nov 17, 2014 2:44 pm

Nitpicker wrote:I've just read as much about the MUPUS hammer and penetrator as I can find (not much), and I am no closer to figuring out what "> 2 MPa hard" means, or how to compare it to any known materials. The instrument is unlike any standard hardness, strength, or toughness test I know of in the field of mechanical engineering. In truth, whatever they were trying to measure in MPa (i.e. pressure, or force/area) was beyond the capability of the instrument anyway. But the test seems more like a standard penetration test used in geotechnical engineering, which typically tests soil density via one kind of empirical formula or another. Yet this test isn't normally measured in MPa, as far as I know. So, it remains a mystery to me.
From what I read at http://www.reddit.com/live/tw0cnch7nxjx/ and clipped a quote from above, this >2MPa was a surprised comment in the MOPUS team's tweet when even the strongest level of hammering they had available wouldn't penetrate the surface.

The test itself was simply aimed at getting some subsurface material. They weren't able to do this because the surface turned out to be much harder than had been anticipated. The designers of course made the machine over ten years ago. From what I've been reading the questions then included wondering if comets actually were solid bodies at all. And famously they've been described as "dirty snowballs". :D
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
Chris Peterson
Abominable Snowman
Posts: 18623
Joined: Wed Jan 31, 2007 11:13 pm
Location: Guffey, Colorado, USA

Re: ESA: Rosetta: 100 days to wake-up

Post by Chris Peterson » Mon Nov 17, 2014 2:54 pm

MargaritaMc wrote:The test itself was simply aimed at getting some subsurface material. They weren't able to do this because the surface turned out to be much harder than had been anticipated. The designers of course made the machine over ten years ago. From what I've been reading the questions then included wondering if comets actually were solid bodies at all. And famously they've been described as "dirty snowballs". :D
It was just about ten years ago that the view started shifting from "dirty snowball" to "snowy dirtball".

Of course, all it takes is a single rock in the wrong place, and it doesn't matter how much snow there is.
Chris

*****************************************
Chris L Peterson
Cloudbait Observatory
https://www.cloudbait.com

User avatar
alter-ego
Serendipitous Sleuthhound
Posts: 1123
Joined: Mon Apr 21, 2008 4:51 am
Location: Redmond, WA

Philae Landing Sequence

Post by alter-ego » Tue Nov 18, 2014 6:10 am

As hoped for, Rosetta's OSIRIS camera has captured Philae's landing/bounce path. Great images; quite an unfortunate spot to finally land.

Edit: According to the NPR and BBC articles, The Philae final resting spot is still not known. The last image at 15:43 is just after the first touchdown. So I guess we'll learn later where Philae is.
OSIRIS Montage of Philae Landing and Bouncing.JPG
@claudiauthorsci
You do not have the required permissions to view the files attached to this post.
Last edited by alter-ego on Tue Nov 18, 2014 6:49 am, edited 2 times in total.
A pessimist is nothing more than an experienced optimist

User avatar
alter-ego
Serendipitous Sleuthhound
Posts: 1123
Joined: Mon Apr 21, 2008 4:51 am
Location: Redmond, WA

Re: ESA: Rosetta: 100 days to wake-up

Post by alter-ego » Tue Nov 18, 2014 6:20 am

Nitpicker wrote:I've just read as much about the MUPUS hammer and penetrator as I can find (not much), and I am no closer to figuring out what "> 2 MPa hard" means, or how to compare it to any known materials. The instrument is unlike any standard hardness, strength, or toughness test I know of in the field of mechanical engineering. In truth, whatever they were trying to measure in MPa (i.e. pressure, or force/area) was beyond the capability of the instrument anyway. But the test seems more like a standard penetration test used in geotechnical engineering, which typically tests soil density via one kind of empirical formula or another. Yet this test isn't normally measured in MPa, as far as I know. So, it remains a mystery to me.
I'm starting to think the fact the hammer broke, the MPa units are referring to tensile strength. If that's true than I've found that the low end of sandstone is 3 to 5 MPa.
As Claudia mentions, the fact the hammer broke means the surface hardness was significantly underestimated.
A pessimist is nothing more than an experienced optimist

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

UK Space Agency: Philae finds hard ice and organic molecules

Post by MargaritaMc » Tue Nov 18, 2014 2:22 pm

UK Space Agency News Release: Philae finds hard ice and organic molecules

18 November, 2014

After a triple landing, positioning it in a new, unplanned location, conditions were not optimal, but Philae was able to work for more than 60 hours sniffing the atmosphere, drilling and hammering to send the resulting data back to Earth.

Icy Hardness

The team responsible for the MUPUS (Multi-Purpose Sensors for Surface and Sub-Surface Science) instrument, which hammered a probe into the comet, estimates that Comet 67P is hard as ice:

"Although the power of the hammer was gradually increased, we were not able to go deep into the surface,"

explains Tilman Spohn from the DLR Institute of Planetary Research, who is leading the research team. Shortly after the triple landing, the scientists could only hope that Philae would be in a position that would allow the probe to be hammered into the surface. However, with MUPUS it has been possible to directly study the strength of a comet’s surface for the first time – and 67P/Churyumov-Gerasimenko proved to be a ‘tough nut to crack’.

"We have acquired a wealth of data, which we must now analyse,"

says comet researcher Spohn. Only the thermal sensors and accelerometers in the anchors that should have fixed Philae to the comet’s surface were not used, because they were not deployed during the touchdown.

Listening to the comet

The team of the SESAME experiment (Surface Electrical, Seismic and Acoustic Monitoring Experiment) can confirm that Churyumov-Gerasimenko is not nearly as soft and fluffy as it was believed to be.

"The strength of the ice found under a layer of dust on the first landing site is surprisingly high,"

says Klaus Seidensticker from the DLR Institute of Planetary Research. The instrument CASSE, which sits in the feet of the lander, was turned on during the descent and clearly registered the first landing as Philae came into contact with the comet. From additional data, the mechanical properties of 67P will be derived. SESAME’s two other instruments suggest that cometary activity at this landing site is low, as well as revealing the presence of a large amount of water ice under the lander.

Images and radio waves before hibernation

One of the big ‘winners’ of the Philae landing is Stefano Mottola from the DLR Institute of Planetary Research, who is responsible for the ROLIS (ROsetta Lander Imaging System) camera. The instrument, mounted on the bottom of the lander, acquired images during the first descent showing the planned landing site, Agilkia. Even after the third landing, it proved possible to reactivate ROLIS and acquire images of the comet’s surface at close range. Thus, the team has data for two different locations on the comet.

A wealth of data was also obtained with the CONSERT (COmet Nucleus Sounding Experiment by Radio wave Transmission) instrument. To achieve this, the lander and orbiter were on different sides of the comet and worked together to analyse the comet nucleus by passing radio signals through it and creating a three-dimensional profile of the core. During the CONSERT measurements, Philae went into hibernation after the power from its primary battery was exhausted. This battery was flown through space already charged to ensure the completion of the first scientific work phase.

Sniffing for organic molecules

The last of the 10 instruments on board the Philae lander to be activated was the Sampling, Drilling and Distribution (SD2) subsystem, which was designed to provide soil samples for the COSAC and PTOLEMY instruments. It is certain that the drill was activated, as were all the steps to transport the sample to the appropriate oven. COSAC also worked as planned and was able to ‘sniff’ the atmosphere and detect the first organic molecules after landing. Now scientists need to analyse whether a soil sample was actually examined in the gas chromatograph. This will be done in collaboration with several instrument teams.
...

...One advantage of the shadier landing site in a crater is that the Philae lander will not overheat as quickly as the comet approaches the Sun, but will benefit from the stronger sunlight. The team managed to rotate the lander during the night of 14/15 November 2014, so that the largest solar panel is now aligned towards the Sun.
Margarita
Last edited by MargaritaMc on Tue Nov 18, 2014 2:47 pm, edited 1 time in total.
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Tue Nov 18, 2014 2:40 pm

alter-ego wrote: I'm starting to think the fact the hammer broke, the MPa units are referring to tensile strength. If that's true than I've found that the low end of sandstone is 3 to 5 MPa.
That's useful information, thank you. In terms of pressure, a (geologist) friend I was chatting to told me that if a mountain bike ran over your foot it would be 0.24 megapascals. And a stiletto high heel it would be 3.24 megapascals.
As Claudia mentions, the fact the hammer broke means the surface hardness was significantly underestimated.
alter-ego, where is the quote from Claudia that you mention? Is it one of the two Claudias on the Rosetta project? I haven't seen it on the blog.

Re the search for Philae
One of the Claudias posted this animated NavCam gif on the Rosetta blog, showing Philae plus its shadow. Alter ego has posted the Osiris photos, above. They are also in the Rosetta blog http://blogs.esa.int/rosetta/2014/11/17 ... the-comet/


Margarita
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Tue Nov 18, 2014 2:54 pm

Note. In all that In have written, please read MUPUS where I've had a blind spot and typed MOPUS.... :derp:

thank you, geck, for the private message :thumb_up:

M
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
Chris Peterson
Abominable Snowman
Posts: 18623
Joined: Wed Jan 31, 2007 11:13 pm
Location: Guffey, Colorado, USA

Re: ESA: Rosetta: 100 days to wake-up

Post by Chris Peterson » Tue Nov 18, 2014 2:58 pm

MargaritaMc wrote:That's useful information, thank you. In terms of pressure, a (geologist) friend I was chatting to told me that if a mountain bike ran over your foot it would be 0.24 megapascals. And a stiletto high heel it would be 3.24 megapascals.
Sure, that's a conventional example of pressure, which is measured in pascals. And if you look through the specs and discussions about the sampling instrument, "pascals" is casually tossed around in discussing hardness. But by itself, that doesn't mean anything. There are lots of metrics for hardness, and where a measure of pressure is used, you also need to know something about the measurement condition (such as probe size).

Frankly, "hardness" is a sloppy term, and I'm surprised they're using it. Geologists generally use concepts based on more fundamental material strength properties, such as compressive and tensile stress, various types of strain and strength, elasticity, and other such values that are rigorously defined and which have values that do not depend on the nature of the tool used to measure them.
Chris

*****************************************
Chris L Peterson
Cloudbait Observatory
https://www.cloudbait.com

User avatar
alter-ego
Serendipitous Sleuthhound
Posts: 1123
Joined: Mon Apr 21, 2008 4:51 am
Location: Redmond, WA

Re: ESA: Rosetta: 100 days to wake-up

Post by alter-ego » Wed Nov 19, 2014 4:53 am

MargaritaMc wrote: ...
alter-ego, where is the quote from Claudia that you mention? Is it one of the two Claudias on the Rosetta project? I haven't seen it on the blog.
...
I'm referring to the team member, Claudia Alexander.
I must admit I'm not twitter savvy so I may be totally misinterpreting the link preceding the tweet. I read the tweet below as being from Claudia (not to Claudia). Because she's is on the team, and that the link takes one to her account, that made sense. Please correct me if I'm wrong.

https://storify.com/brenthugh/philae-s- ... ts-results
Tweet.JPG
You do not have the required permissions to view the files attached to this post.
A pessimist is nothing more than an experienced optimist

User avatar
alter-ego
Serendipitous Sleuthhound
Posts: 1123
Joined: Mon Apr 21, 2008 4:51 am
Location: Redmond, WA

Re: ESA: Rosetta: 100 days to wake-up

Post by alter-ego » Wed Nov 19, 2014 5:16 am

Chris Peterson wrote: ...
Frankly, "hardness" is a sloppy term, and I'm surprised they're using it. Geologists generally use concepts based on more fundamental material strength properties, such as compressive and tensile stress, various types of strain and strength, elasticity, and other such values that are rigorously defined and which have values that do not depend on the nature of the tool used to measure them.
That's my thought also. When I finally understood MUPUS to be penetrator and not a standard "hardness" tool having a defined shape where an area is measured, it made no sense for a connection to standard "hardness" units. Applying a known force over a measured indented area (Pascal) does make sense, but that's not the case with MUPUS. Saying something is "2 MPa hard" is way confusing. Instead saying something is "way hard" and leaving out the "2 MPa" descriptor would have been better. No peer reviews for tweets so we have to stay on our toes - I'd say 2 MPa vigilant!
A pessimist is nothing more than an experienced optimist

User avatar
alter-ego
Serendipitous Sleuthhound
Posts: 1123
Joined: Mon Apr 21, 2008 4:51 am
Location: Redmond, WA

Re: UK Space Agency: Philae finds hard ice and organic molec

Post by alter-ego » Wed Nov 19, 2014 5:57 am

UK Space Agency News Release: Philae finds hard ice and organic molecules
...
Icy Hardness

The team responsible for the MUPUS (Multi-Purpose Sensors for Surface and Sub-Surface Science) instrument, which hammered a probe into the comet, estimates that Comet 67P is hard as ice:
Makes sense:
ice.JPG
You do not have the required permissions to view the files attached to this post.
A pessimist is nothing more than an experienced optimist

User avatar
Nitpicker
Inverse Square
Posts: 2692
Joined: Fri Sep 20, 2013 2:39 am
Location: S27 E153

Re: ESA: Rosetta: 100 days to wake-up

Post by Nitpicker » Wed Nov 19, 2014 7:23 am

The failure mechanism in the tested material, required for the penetrator to penetrate the material, is quite complex, involving tensile, compressive and shear stresses, and in the case of ice and various silicate ices, is also dependent on strain rate, I think.

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Wed Nov 19, 2014 12:02 pm

alter-ego wrote:
MargaritaMc wrote: ...
alter-ego, where is the quote from Claudia that you mention? Is it one of the two Claudias on the Rosetta project? I haven't seen it on the blog.
...
I'm referring to the team member, Claudia Alexander.
I must admit I'm not twitter savvy so I may be totally misinterpreting the link preceding the tweet. I read the tweet below as being from Claudia (not to Claudia). Because she's is on the team, and that the link takes one to her account, that made sense. Please correct me if I'm wrong.

https://storify.com/brenthugh/philae-s- ... ts-results
Tweet.JPG
I hadn't seen that tweet! Did you post it here? I can't find it. But I very probably can't see for looking.
By the way, I'm not at all tweet savvy. Yes, she is the NASA rep on the Rosetta team.

Thanks for the find.
M
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Wed Nov 19, 2014 12:18 pm

I've just found the source of the information for the UK space agency press release that I posted above. It was

DLR,, The German Aerospace Center
Before going into hibernation at 01:36 CET on 15 November 2014, the Philae lander was able to conduct some work using power supplied by its primary battery. With its 10 instruments, the mini laboratory sniffed the atmosphere, drilled, hammered and studied Comet 67P/ Churyumov-Gerasimenko while over 500 million kilometres from Earth. After a triple landing, positioning it in a new, unplanned location, conditions were not optimal, but Philae was able to work for more than 60 hours and send the resulting data back to Earth. It was controlled and monitored from the German Aerospace Center (Deutsches Zentrum für Luft- und Raumfahrt; DLR) Lander Control Center (LCC). Now, the complicated data analysis begins. DLR's Scientific Director for the project, Ekkehard Kührt, is very pleased with the results so far. "We have collected a great deal of valuable data, which could only have been acquired through direct contact with the comet. Together with the measurements performed by the Rosetta orbiter, we are well on our way to achieving a greater understanding of comets. Their surface properties appear to be quite different than was previously thought.
...
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Wed Nov 19, 2014 7:22 pm

Latest Rosetta news release here:
http://www.esa.int/Our_Activities/Opera ... ence_phase

Plus there is more new info about Philae at the Rosetta blog

http://blogs.esa.int/rosetta/2014/11/18 ... vered-ice/
(This is about MUPUS)

http://blogs.esa.int/rosetta/2014/11/19 ... the-comet/  (This is about SD2)

Engineers from ESOC and the Lander Control Centre will take part in a reddit AMA (Ask me Anything!) on Thursday, 20 November 19:00 CET* start. More details at this URL when available. http://blogs.esa.int/rosetta/2014/11/19 ... cet-start/

*This is 18:00 UTC/GMT

M
"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS

User avatar
MargaritaMc
Look to the Evenstar
Posts: 1836
Joined: Wed Jan 09, 2013 10:14 pm
Location: 28°16'7"N 16°36'20"W

Re: ESA: Rosetta: 100 days to wake-up

Post by MargaritaMc » Wed Nov 19, 2014 8:33 pm

"In those rare moments of total quiet with a dark sky, I again feel the awe that struck me as a child. The feeling is utterly overwhelming as my mind races out across the stars. I feel peaceful and serene."
— Dr Debra M. Elmegreen, Fellow of the AAAS